Perhaps a lot of people for the iron oxide black is not very understanding, but the product is a very good use of the product, the specific performance is also very good. Of course, the current application of the product is also very wide, then you are concerned about the content of this is very concerned about it?
At present, the scope of application of the product is very wide, especially for the production of some magnetic materials. And the product is currently in medicine is also a very wide range of uses, tumor treatment, cell separation and other aspects can be used in the material, in medicine has a very prominent contribution. In addition, the use of the product is very extensive in all aspects of magnetic recording materials, abrasives, primers, topcoats and so on. So I hope you can be more serious attitude to pay attention to this aspect of the content, so that you will be able to use the product of the most fundamental understanding, to better understand the specific characteristics of the product, with better use of results.
Iron oxide is a commonly used magnetic material.
The specially made pure iron oxide is used as a raw material for recording tapes and telecommunications equipment.
Natural magnetite is the raw material for iron making.
Used for making basins and topcoats.
Iron oxide is the main raw material for the production of iron catalyst (a catalyst).
It is very hard, can be used as abrasive. Has been widely used in the field of automotive braking, such as: brake pads, brake shoes and so on.
Iron oxide in the field of domestic welding materials have been recognized for welding electrodes, wire production is still in its infancy, the market prospects are very broad.
Iron oxide because of its large proportion of strong magnetic characteristics, in the sewage treatment showed good performance.
Iron oxide can also be made of pigments and polishing agent.
We can also through some chemical reactions, such as the use of sodium nitrite and so on, so that the surface of steel to produce a layer of dense iron oxide, used to prevent or slow down the corrosion of steel, such as firearms, saw blades and other surface blue, Black. Commonly known as “roast blue”.
Making special electrodes.
Iron oxide black is a mysterious iron oxide material, color is black, and more iron oxide black witnessed the mystery. Emerging prepared as microwave method, carbonyl body before pyrolysis method, ultrasonic method, air oxidation, pyrolysis – reduction method, the polyol reduction method is becoming a hot research scholars. In the process related to the preparation of Fe3O4, the novel surfactant system, it has also prepared a breakthrough. In fact, iron oxide black just alias tetroxide body, the general name for scientific or in the iron oxide-based.
The method of iron oxide black nano-technology is more cost-precipitation, precipitation due to its simple process operating low cost, high purity, uniform composition, suitable for mass production, the most common method for producing nanoparticles. At the same time, by adding the mixture to precipitate the organic dispersant or complexing agent may improve the dispersion of the nanoparticles, the nanoparticles to overcome the shortcomings of easy to join. Commonly used precipitation has co-precipitation method, hydrolysis precipitation method, ultrasonic precipitation method, hydrolysis of metal alkoxides and chelates decomposition method. Note also that the black iron nano precipitation method when the precipitation is also divided into a variety of use of the corresponding precipitation, it needs to produce the corresponding iron oxide black.
Nano-based method is to have a iron oxide black hydrothermal method, about the general chemical reaction at high temperature and pressure in an aqueous solution (organic solvent) such as steam or fluid carried. Hydrothermal synthesis is the last ten years developed a process for producing nano-powders, small particle size Fe3O4 prepared by this method, more uniform particle size, does not require high-temperature calcination pretreatment, and to achieve multivalent ions doped miscellaneous. However, due to hydrothermal method requires the use of high temperature, high pressure equipment, and therefore this method is high cost, difficult to achieve large-scale production. This method is the use of inorganic salts and organic fusion hair, but also the most common use.